Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateLinear Gate Repair in Las Vegas: What to Know First
Linear gate repair in Las Vegas is work we do regularly, and most jobs are diagnosed in one visit and fixed the same day. As an independent Linear service provider, we’re not affiliated with the manufacturer, but we know their boards, arms, and receivers well enough to tell you the real fix, not a guess. A typical Linear repair runs between $185 and $420 depending on whether we’re replacing a capacitor, a receiver, or the full swing arm. You’ll always get a written price before we touch anything. If you’ve got a Linear opener that stopped responding, call us at (725) 529-9468 and describe what it’s doing, and we’ll tell you what you’re likely looking at.
This page is for homeowners who own a Linear gate system, know the brand name on the box, and want someone who won’t treat it like a mystery. We’ll walk you through the common failure points, what repair actually costs here in Las Vegas, and how we work from first call to final test.
How Linear Products Fail – and How We Fix Them
- Linear LRA series swing arms: capacitor death from heat. The older LRA and LRA-S swing arm operators have a run capacitor that fails in Las Vegas summers faster than in almost any other market. The symptom is a gate that hums but doesn’t move, or moves about six inches and quits. We replace the capacitor with a higher-temperature-rated part when the arm itself is still sound, which costs less than half what a full arm replacement runs. If the arm has been struggling for months, the motor windings are usually scorched too, and we’ll tell you that before any work starts.
- Linear M-series control boards: blown relay from power surges. The M-series boards run fine until a monsoon-season surge hits or a lightning strike rides the power line into the board. The gate goes dead, no lights, no response from the remote. We test the board, and if it’s the relay, we swap in a factory-spec relay rather than junking a board that still has years left in it. If the board is fried beyond that, we install an OEM Linear board or a quality aftermarket equivalent and program it to your existing remotes.
- Linear APeX receivers: intermittent remote range in HOA-dense neighborhoods. Homes in Summerlin, Henderson, and parts of Centennial Hills sit close enough that neighboring gate remotes and garage openers can crowd the same frequency band. Your Linear remote works from twenty feet away one day and only from the driveway the next. We check the antenna position, test the receiver’s sensitivity, and often move to a Linear multi-code or rolling-code receiver that filters out the cross-talk. It’s not always the remote; it’s usually the receiver listening to the whole neighborhood.
- Linear slide gate chains: stretch and jump in dry heat. Linear slide operators on chain-drive systems run into stretched chain and loosened master links after a few years of 110-degree days. The chain jumps, the gate lurches, and eventually the limit switch loses track of where the gate actually is. We re-tension or replace the chain, set the limits properly, and test the safety edges so the gate stops and reverses the way it should. This one’s less about the brain and more about the bones.
- Linear keypad and photo-eye failures from sun exposure. The plastic housings on Linear keypads and photo eyes get brittle after enough UV. Water gets in, the keypad keys stop responding, and the photo eyes go into fault mode, which makes the gate refuse to close. We replace the housings and seals, not just the electronics, and position the new parts so they’re shaded where possible. If the wiring from the keypad to the board has corroded, we run new wire and seal the connections properly.
Styles & brands we work with





Our Linear Gate Repair Process
- 1
You call or text us at (725) 529-9468. A real person answers. You tell us what the gate is doing, or not doing, and we give you a straight range of what it typically costs to fix that problem. No obligation, no pressure.
- 2
We send you the tech’s name and photo before the visit. The technician coming to your house is background-checked, identity-verified, and photo-badged. You’ll know who’s at the door before they knock, and when they arrive, they show their badge.
- 3
On-site diagnosis. The tech tests the Linear board, the motor, the limits, the receiver, and the physical gate itself. We find the actual fault, not the most convenient one.
- 4
Written price before work starts. You get the exact price in writing. No surprise line items at the end. If we find something else while we’re in there, we stop and get your approval before adding anything.
- 5
Repair with the right parts. We use OEM Linear parts when they’re available and make sense, and quality aftermarket parts when they’re the better value. We’ll explain the difference honestly.
- 6
Test and guarantee. We cycle the gate repeatedly, test the safety edges and photo eyes, and make sure the limits are set correctly. Every repair is covered by our 365-Day Done Right Promise. If it fails within a year, we come back free.
See the difference
Before
After
Before
After
Before
AfterWhat Linear Gate Repair Costs in Las Vegas
Most Linear gate repairs in Las Vegas land between $185 and $750 depending on the part and the labor. A capacitor or limit switch replacement runs in the $185 – $289 range, a receiver or keypad usually sits between $220 and $380, and a full swing arm or control board replacement runs $450 to $750 with parts included. The price moves based on the specific Linear model, whether we’re pulling OEM or quality aftermarket parts, and how much re-wiring or physical gate adjustment is involved.
Every quote is written, and it’s handed to you before any work starts. That means the price you agree to is the price you pay, period. Call (725) 529-9468 for a free estimate on your specific Linear system, and tell us what it’s doing wrong, and we’ll tell you what it costs to fix it.
Why Las Vegas Homeowners Call Warden Gate Repair Las Vegas for Linear Work
Cole Rafferty built Warden Gate Repair Las Vegas around the one thing he couldn’t find when he needed a gate repair himself: a straight answer on cost before anyone picks up a wrench. We’ve been doing gate repair since 2008 as part of the Threshold Group family, and every tech who rolls up to a Las Vegas home has been background-checked, identity-verified, and sent to you by name and photo before arrival. That’s the Threshold Standard, and it’s on every single job. We work on Linear, LiftMaster, Mighty Mule, Ghost Controls, and DoorKing systems, so when we say we know your opener, we’re not bluffing. And if the repair isn’t right, the 365-Day Done Right Promise means we come back free. No fine print, no arguing.
FAQs
No, we’re an independent Linear service provider, and we’re not affiliated with or authorized by Linear. We have no manufacturer restrictions telling us which parts to push, so we can give you the honest option between OEM Linear components and quality aftermarket parts based on what’s actually best for your gate and your budget. Our techs are factory-trained on Linear systems, but the warranty on new parts comes from the part manufacturer, and our labor is covered by the 365-Day Done Right Promise.
In most cases, yes. We keep common Linear parts on the truck: capacitors, receivers, limit switches, transformers, and control-board components. If your opener needs something we have on hand, we’ll usually have it fixed in one visit. If we need to order a specific board or swing arm for an older Linear model, we’ll tell you that before we leave and give you a written quote and a realistic timeline. Call (725) 529-9468 and tell us what the gate is doing, and we’ll give you a straight answer on timing.
If your Linear opener is under ten years old and the failure is isolated to one component, like a capacitor, receiver, or limit switch, repair makes sense and costs a fraction of replacement. If the motor windings are scorched, the gearbox is grinding, or the board has suffered repeated surge damage, replacement is usually the smarter money. We’ll tell you honestly which side of that line your system is on, and we’ll quote both options so you can decide with real numbers in front of you.
If your Linear opener is still under warranty, an independent repair could affect warranty coverage depending on the specific terms. We’ll help you check your warranty status and what it covers before we open anything up. For most systems that are out of warranty, which is the majority of what we see in Las Vegas, the only thing that matters is getting the right part installed correctly and standing behind the work, which is exactly what we do.
Intermittent operation is usually one of three things: a failing capacitor that works until it heats up, a receiver picking up interference from neighboring remotes, or a limit switch that’s drifting out of position as the gate moves through its cycle. The fact that it works sometimes doesn’t make it less urgent; it means the part is on its way out and will eventually fail for good, usually when you need the gate working the most. We can test and isolate the fault in one visit. Call (725) 529-9468 for an exact diagnosis, and estimates are free.
If your Linear gate is acting up in Las Vegas, we’re one call away. Tell us what it’s doing wrong, and we’ll give you a straight answer on what it costs to fix it. Call (725) 529-9468 today for a free estimate, or to schedule a technician who shows up with a name, a photo, and a written price.
Written by Cole Rafferty, Owner, Warden Gate Repair Las Vegas at Warden Gate Repair Las Vegas, serving Las Vegas and nearby areas.