Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in North Las Vegas, NV
Warden Gate Repair handles gate and opener problems across North Las Vegas, from Aliante down to the Las Vegas Motor Speedway corridor. Most of the gates we see here are iron driveway gates and community entrance gates on stucco homes built between 1995 and 2010. The desert heat, expanding alkaline soil, and monsoon season combine to create failures you do not see in other parts of the valley. If your gate is sticking, sagging, or just stopped moving, call (725) 529-9468 and we will send a named, photo-badged technician with a written price before any work starts.
Why North Las Vegas Homes Are Different
North Las Vegas sits on expansive clay soil that shifts with moisture through the year. That movement is rough on gate posts and hinges. After a monsoon thunderstorm, the soil swells and pushes posts out of alignment. Then the 110°F summer heat bakes it dry and the ground contracts again. The result is a gate that was square in May and dragging by August.
The housing stock adds another layer. Homes built north of Cheyenne Avenue in the late 1990s and 2000s used lightweight tubular steel for driveway gates. Those frames sag at the hinge welds after two decades of hard water from the valley’s supply, and the alkaline soil accelerates rust at the base of every post. In the Aliante and Eldorado communities, we regularly see solar-powered gate operators with panels so caked in wind-blown dust that the gate only works in the morning before the heat climbs.
Community entrance gates throughout North Las Vegas face the same conditions but with far more cycles per day. A slide gate at an HOA entrance in Eldorado may open and close forty times between 6 a.m. and 9 a.m. That repetition, combined with summer heat that soaks circuit boards, means small problems become full failures quickly.
Styles & brands we work with
Our Main North Las Vegas Services
Most calls from North Las Vegas homeowners fall into one of three categories, and each has its own page with the full scope, local pricing breakdowns, and what to expect on the day of the visit.
Gate Repair in North Las Vegas
Sagging iron gates, broken hinge welds, stuck rollers, and gates that scrape the concrete are the routine work here. In North Las Vegas, we frequently repair gates where the post has shifted in expansive clay, leaving the latch out of alignment by half an inch or more. The fix usually involves resetting the post or re-hanging the leaf, not just bolting on a new hinge. Gate Repair in North Las Vegas covers all of it, from single driveway gates to welded frame repairs.
Electric Gate Repair in North Las Vegas
Electric gate problems in North Las Vegas often trace back to two things: heat-damaged control boards and power interruptions. When a gate starts working intermittently and the problem gets worse through the afternoon, the board is usually failing from temperature cycling inside the operator housing. We also handle photo eye misalignment, keypad failures, and wiring damage from monsoon water intrusion. Electric Gate Repair in North Las Vegas explains the diagnostic process and what we check first.
Gate Motor Repair in North Las Vegas
The motor is the box that slides or swings your gate automatically. North Las Vegas heat is hard on these units, especially motors mounted in full afternoon sun on west-facing driveways. Thermal overload trips, worn drive gears, and capacitor failures are the three most common calls. We service chain, belt, and screw drive operators, and we replace motors on both slide and swing gates. Gate Motor Repair in North Las Vegas covers replacement, repair, and the brands we stock.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in North Las Vegas
We carry parts for the brands that North Las Vegas homeowners and HOAs actually have installed. That means BFT and Linear operators on community gates, Viking on older slide gates, and Ghost Controls on newer residential installs. Stocking the right boards, gears, and remotes locally means we can usually complete a repair in one visit instead of waiting for a distributor. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in North Las Vegas, NV
| Service | Typical range in North Las Vegas |
|---|---|
| Gate repair service call and diagnostic | $79 – $129 |
| Hinge replacement on a standard driveway gate | $150 – $300 |
| Gate frame welding repair | $180 – $400 |
| Gate wheel or roller replacement | $90 – $220 |
| Electric gate troubleshooting and repair | $120 – $350 |
| Circuit board replacement | $250 – $600 |
| Gate motor replacement parts and labor | $350 – $850 |
| Solar panel repair or replacement | $180 – $450 |
| Remote or keypad programming | $75 – $150 |
| Gate track cleaning and realignment | $100 – $250 |
The biggest price drivers in North Las Vegas are post resetting from clay soil movement and circuit board replacement from heat exposure. Every repair gets a written price before we touch a bolt, and that price is the price you pay. No line items added at the end.
Neighborhoods We Serve in North Las Vegas
We cover the whole city. Our technicians run calls from the Speedway corridor up to the 215 Beltway edge daily, so a repair in any of these areas is usually scheduled within one business day.
- Aliante
- Eldorado
- Centennial Hills
- North Cheyenne
- Las Vegas Motor Speedway corridor
Service Area – Cities Near North Las Vegas
Warden Gate Repair handles gate work across the Las Vegas Valley. Our Las Vegas office dispatches technicians to North Las Vegas and the surrounding areas every day, including Las Vegas, NV and the neighborhoods closest to the base at Nellis AFB, NV.
Serving North Las Vegas, NV - Our Local Coverage Area
We’re based in the North Las Vegas area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in North Las Vegas
Most non-emergency calls in North Las Vegas are scheduled within one business day. We run daily routes through Aliante, Eldorado, and the central city neighborhoods. Emergency calls are answered live 24/7 at (725) 529-9468.
For homeowner gate repairs, the HOA is not usually involved unless the gate is a community entrance gate. If you live in an HOA community and the gate is yours, you decide when the repair happens. Community entrance gates go through the HOA’s process. If you are unsure, call us and we will help you figure out what applies to your situation.
Yes. Circuit boards inside operators fail faster when they run hot, and 115°F afternoons push temperatures well past their safe operating range. North Las Vegas sees more board failures in July and August than any other time of year. A shaded operator housing or a well-ventilated mount helps, but heat is the number one killer we see here.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What North Las Vegas Customers Say
"Good repair on our gate operator board. Waited a couple days for the board to arrive, but he checked in. Works perfectly now."
- Monica P."Gate was closing on my truck bumper. The loop detector had failed. Replaced it and adjusted the force setting."
- Dina K."Swing gate wouldn't latch after the hinge sagged. He re-hung it, adjusted the hinge pins, and fixed the latch. Quoted before starting."
- Annette R.