Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterAutomatic Gate Repair in Las Vegas, NV
Automatic gate repair in Las Vegas means getting your electric gate motor, hinges, sensors, or control board working again so your property stays secure and your gate opens when you need it to. Most automatic gate failures we see across the valley come down to three things: a worn-out gate motor (the box that slides or swings your gate automatically), a sensor knocked out of alignment by desert wind, or a control board fried by a summer power surge. Warden Gate Repair Las Vegas has specialized in exactly this kind of work since 2008, and we handle it differently than a general handyman would: you get a written price before any work starts, and a technician whose name and photo are sent to you before they arrive. If your gate is stuck, grinding, or refusing to close, call us at (725) 529-9468 and you’ll talk to a live person, day or night.
We focus strictly on gate repair, electric gate repair, and gate motor repair. That’s the whole job. If you’re looking for a broader sense of what we cover, see our Gate Repair in Las Vegas page. But if your gate moves on its own and it’s not moving right, you’re in the right place.
When You Need Automatic Gate Repair
Automatic gates don’t usually fail without warning. There’s almost always a symptom first, and knowing what to listen for can save you from a full motor replacement. Here’s what we hear most often from homeowners in Summerlin, Henderson, and the northwest valley:
- The gate starts and stops halfway. This usually points to a sensor issue or an obstruction detection setting that’s drifted out of calibration on your BFT or Linear control board.
- The motor hums but nothing moves. A humming motor with no movement often means a capacitor failure or a gearbox that’s stripped inside the operator. Continuing to press the remote can burn out the motor entirely.
- The gate opens but won’t close, or closes but won’t open. This is frequently a limit switch problem or a failing safety sensor. On many Viking and Ghost Controls systems, one bad photo eye will deliberately prevent closure as a safety measure.
- The remote works only from a few feet away. Desert heat degrades receiver boards over time. If you’re standing close and still struggling, the issue is almost always the receiver or the antenna, not the remote.
- The gate slams or moves erratically. Worn hinges on a swing gate, or cracked wheels on a slide gate, will make even a healthy motor jerk and fight. Left unchecked, the strain shortens the life of your operator by years.
Any of these is worth a call for Gate Repair services. The longer an automatic gate runs with a fault, the more expensive the fix becomes.
Our Automatic Gate Repair Process
- Call and talk to a person. Our phone line is answered by a live human 24/7. You’ll describe the symptom, and we’ll book a window that works for your schedule. No chatbot, no voicemail tag.
- Know who’s coming. Before the appointment, you’ll receive your technician’s name and photo. That person arrives in uniform, shows a photo ID badge at the door, and is background-checked and identity-verified. We call this the Threshold Standard, and it’s enforced on every single visit.
- Get a written price up front. The technician diagnoses the problem, then puts the complete price in writing before any work begins. That price covers parts and labor. If anything changes during the repair, you’ll approve it first.
- Repair with the right parts. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule gates. Your technician arrives with brand-matched knowledge and the correct components rather than generic substitutes.
- Test and walk through. Before we consider the job done, we cycle the gate through several full open-close sequences, re-check sensor alignment, and make sure remotes and keypads work from normal distances.
- Receive your written guarantee. Every repair is covered by the 365-Day Done Right Promise. If the same issue returns within a year, we return and make it right at no charge. The second visit is included in every job, automatically.
Automatic Gate Repair Pricing in Las Vegas
Automatic gate repair in Las Vegas typically runs from $145 to $980 depending on what’s actually wrong. A misaligned photo eye or a quick limit switch adjustment sits at the low end. A full gate motor replacement lands at the high end. You’ll know your exact number before anything starts because we don’t work from vague estimates.
Here’s what we typically see across the valley:
- Sensor or photo-eye repair: $145 to $280, including realignment, cleaning, or wiring fix
- Control board repair or replacement: $320 to $680, depending on the brand (Linear and Ghost Controls boards run lower; BFT and Viking tend to run higher due to part cost)
- Gate motor (operator) replacement: $650 to $980 for most residential swing or slide operators, including labor and setup
- Hinge, wheel, or track repair: $180 to $450, depending on gate weight and whether we’re replacing or rebuilding hardware
- Remote programming and receiver replacement: $95 to $250, including up to two remotes programmed on-site
What affects the price? The operator brand is a big one. Viking and BFT parts carry a premium because of their heavy-duty construction. Gate weight and length matter too; a 14-foot iron swing gate puts more strain on its operator than a 6-foot pedestrian gate. And age matters: a 3-year-old LiftMaster is usually repairable, while a 15-year-old no-name board may make replacement the smarter financial call.
We’ll always tell you if repairing beats replacing. When the numbers are close, we’ll show you both options side by side and let you decide. Estimates are free, and the written price you receive is the price you pay, no surprise line items at the end. For an exact quote on your gate, call (725) 529-9468.
FAQs – Automatic Gate Repair
Is it cheaper to repair or replace an automatic gate motor?
If your gate motor is under eight years old and the failure is isolated to one component like a capacitor, limit switch, or control board, repair is almost always cheaper, typically $145 to $480. If the motor is over 12 years old, or the gearbox has stripped, replacement usually makes more financial sense, running $650 to $980 installed for most residential operators. We’ll give you both prices in writing so you can decide with real numbers in front of you. Call (725) 529-9468 and we’ll diagnose yours.
Can you fix my automatic gate the same day I call?
Yes, in most cases. We keep same-day and next-day appointment slots open specifically for gate failures that have left a home unsecured. If your gate is stuck open, stuck closed, or refusing to latch, tell the live person on the phone and we’ll prioritize the visit. The technician arrives with your name and photo already sent to your phone, so you’ll know exactly who’s at the gate before they step onto your property.
Will a power outage damage my automatic gate?
Power outages themselves rarely damage a gate motor, but the surge when power comes back on can absolutely fry a control board. In Las Vegas, especially during monsoon season, we see a spike in control board failures and Gate Realignment issues right after lightning storms and rolling blackouts. A surge protector on the gate circuit is cheap insurance, and if your gate stopped working after a storm, the board is the first thing we check.
Do you work on all gate brands?
We’re factory-trained and authorized to service nine major brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That covers the vast majority of automatic gates in Las Vegas and Henderson. If you have a brand outside that list, call us anyway and we’ll tell you honestly whether we can source parts or recommend the most reliable alternative.
Why Las Vegas Homeowners Choose Warden Gate Repair
The name matters to us. A warden is someone trusted to watch over a place and keep it secure. That’s the whole idea behind a gate, and it’s the standard we hold our technicians to. Before any Warden technician arrives at your door, you’ll have their name and photo. At the door, they’ll show a photo ID badge. Every repair gets a written price first and a written guarantee after. And if the repair isn’t right within 365 days, we return and fix it free. That’s the 365-Day Done Right Promise, and it’s in writing.
We don’t do general handyman work. We don’t install water heaters or patch drywall. We repair automatic gates, electric gates, and gate motors, and that focus is why our phone is answered day and night by someone who actually knows what a limit switch does. If your gate is acting up in Las Vegas, call (725) 529-9468 for a free estimate. You’ll talk to a person, not a machine, and you’ll know exactly who’s coming to your home before they arrive.
Written by Cole Rafferty, Owner at Warden Gate Repair Las Vegas, serving Las Vegas.